Audison Prima APBMW S8-4 8" 300W Peak BMW-MINI Plug & Play Car Subwoofer
Subwoofers have been designed with electro-acoustic parameters that maximize performance for the factory box available below the seats. The ABS plastic basket, reinforced with fiberglass, and the acoustic structure featuring a front magnet, provide for a minimal installation depth for a perfect compatibility with the whole range. Two 5 mm polyurethane gaskets, supplied, allow the subwoofer to fit perfectly to the box, decoupling it from vibration.
The 200 mm (8″) APBMW S subwoofers allow a “direct replacement” of the OEM speakers underneath the front seats, making the most of the factory acoustic load and generating deep and crisp low frequencies. You can choose between S8-2 with 2 ohm impedance and S8-4 with 4 ohm impedance for improved system composition versatility. In fact, in the mid-high passive filtered system configuration, with the crossover provided, 4 of the 8-channels of the AP 8.9 bit can be configured in bridge mode delivering 130W rms to each S8-4 installed under the seat. The S8-2 can be used in a fully active, multi-amplified front system, maximizing the power of the AP 8.9 bit at 2 ohms, and employing additional 2 channels for the rear system. The Neodymium magnet used on S8-4 and S8-2 allows for greater power and control than ferrite, while maintaining the depth of installation unaltered.
Technical Specifications
- Component - Woofer
- Size mm (in.) - 200 (8)
- Power Handling
- W peak - 300
- W continuos - 150
- Impedance Ω - 4
- Frequency Response Hz - 35 ÷ 500
- Magnet size D x d x h mm(in.) - 48 (1.89) x 18 (0.71) x 7 (0.28)
- Weight of one speaker kg (lb.) - 1,21 (2.67)
- Voice Coil Ø mm (in.) - 50 (2)
Content:
- 1 x Car Subwoofer
- Manual
- Fittings as per Manufacturer