Skip to content

Storewide 5% OFF for your 1st Order 👍🛒

FREE SHIPPING for orders above RM99 Above (West Malaysia)🎉🎉

Best Shipping Rate for East Malaysia 👍

  • settings SKU: AP5.9BIT+STPHS10

Audison AP5.9 bit Prima Series 5-Channel Amplifier with Built-In Digital Sound Processor FOC 1 x STP Hood Solution 10

RM2,554.00 RM3,699.00
Unit price  per 

Audison Prima Series AP5.9 bit 5 Channel Amplifier with Built-In Digital Sound Processor FOC 1 x STP Hood Solution 10 

 

AP5.9 bit amplifier is ideal to realize a two way front full active plus subwoofer system using the fifth mono channel with 270 W @ 2 Ω. The built-in processor with 9 output channels, that this amplifier shares with the AP8.9 bit, provides the ability to assign the pre-outs to the AP4 D amplifier, creating a very powerful system in a small space thanks to the optional stacking system.

 

AP5.9Bit Specifications:

Power Supply

  • Voltage: 7.5 ÷ 15 VDC
  • Idling current: 1.5A
  • Switched off: <1.4mA
  • Consumption @ 14.4 VDC 2Ohms Max Musical Power (without CPL): 30A
  • Remote IN: 7 ÷ 15 VDC (1mA)
  • Remote OUT: 11 ÷ 15 VDC (200mA)
  • Fuse: 30A
  • ART (Automatic Remote Turn on/off): Speakers to input - selectable
  • AST (Automatic Signal Turn on/off): Pre-In to input - selectable
  • CPL (Continuous Power Limiting): Max continuous power - selectable

Amplifier Stage

  • Distortion - THD @ 1kHz, 4Ohms, 90% Output Power(Ch1-4): 0.08%
  • Distortion - THD @ 1kHz, 4Ohms, 90% Output Power(Ch5): 0.1%
  • Bandwidth (-3 dB 2V RMS, 4Ohms): 10 ÷ 22kHz / 10 ÷ 500Hz SUB
  • S/N ratio @ A weighted, 1V, Max Power: 95dBA
  • Damping factor @ 1kHz, 2V RMS, 4Ohms: >70
  • Input sensitivity: 2 ÷ 5V RMS
  • Input impedance: 15k Ohms
  • Load Impedance (Min):
  • Ch: 1-2-3-4-5: 2Ohms
  • Max Power: 530W
  • OUTPUT POWER (RMS) @ 12 ÷ 14.4VDC, 1% THD:
  • 5 Ch @ 4Ohms: 20W x 2 + 50W x 2 + 150W x 1
  • 5 Ch @ 2Ohms: 40W x 2 + 90W x 2 + 270W x 1
  • OUTPUT POWER (RMS) @ 14.4 VDC, 10% THD:
  • 5 Ch@ 4Ohms: 25W x 2 + 60W x 2 +190W x 1
  • 5 Ch@ 2Ohms: 50W x 2 + 115W x 2 + 350W x 1

CEA Specifications

  • Output power @ 4Ohms ≤ 1% THD+N, 14.4 V: 20W x 2 + 50W x 2 + 150W x1
  • SN ratio (ref. 1W output): 80 dBA

Signal Connections

  • Input Stage:
  • Config 1: Hi / Lo level FL-FR-RL-RR + N.2 customizable
  • Config 2: Hi / Lo level FL-FR-RL-RR + Stereo Aux In (Selectable: DRC/select.)
  • Optical IN (max 96kHz / 24bit): S/P-DIF PCM 96kHZ/ 24bit max (Selectable: DRC/select.)

Digital Signal Processor

  • Crossover: Full / Hi Pass/ Lo Pass/ Band Pass
  • Crossover type and slope: Linkwitz @ 12/27 dB - Butterworth @ 6/12/18/24 dB
  • Crossover Frequency: 68steps @ 20 ÷ 20kHz
  • Phase inversion: 0° / 180°
  • Anolog Input Equalizer: Automatic De-Equalization
  • Output Equalizer: N.9 Parametrics Equalizers: ±12 dB;10 pole; 20 ÷ 20k Hz
  • Time Alignment Distance: 0 ÷ 510 cm / 0 ÷ 200.8 in.
  • Time Alignment Delay: 0 ÷ 15ms
  • Time Alignment Step: 0.08 ms; 2.8 cm / 1.1 in.
  • Time Alignment Fine Set: 0.02 ms; 0.7 cm / 0.27 in.

SYSTEM SET

  • Preset (Drive Preset): Rotary switch for 7 installation Presets
  • Acoustic Preset: N.2 DSP Memory, DRC selectable

Control Connections

  • From / to personal computer: 1 x micro USB-B
  • To Audison Electronics: DRC controls
  • ASP: Automatic Speaker Presence (For Module)
  • Optical / AUX select: 12V control for Optical In / AUX enable
  • Master enable: 12V control for Master In enable

General Requirements

  • PC connections: Micro USB (1.1 / 2.0 / 3.0)
  • Software/PC requirements: Microsoft Windows (32/64 bit): XP, Vista, Windows 7, Windows 8
  • Graphic card min. resolution: 800 x 600
  • Ambient operating temperature range: 0 °C to 55 °C (32°F to 131°F)

 

STP Hood Solution 10 Specifications:

  • Package contains: 1.12 m2
  • Package contains: 1 sheets
  • Sheet size: 1400 x 800 mm
  • Thickness: 10 mm

 

Content:

  • 1 x Car Sound Processor 
  • 1 x STP Hood Solution 10 
  • Manual
  • Fitting as per Manufacturer

Professional Consult

Worldwide Shipping

Huge Selection