Menu

Audison bit Ten D Digital Signal Interface Processor Car Sound Processor

 

The bit Ten D is a digital signal processor essential to maximize the acoustic performance of your car audio system. It consists of a 32-bit DSP processor and 24-bit AD and DA converters. It can connect to any factory system, even in vehicles featuring an integrated audio processor, since, thanks to the de-equalization function, the bit Ten D will send back a linear signal. It features 8 signal inputs: 4 Hi-Level, 1 Aux Stereo, 1 Phone, 1 S/PDIF optical digital. It provides 5 PRE OUT analog and 8 digital outputs. Each output channel has a 31-band equalizer available. It also features a 66-frequency electronic crossover as well as BUTTERWORTH or LINKWITZ filters with 6-24 dB slopes and a digital time delay line. The user can select adjustments that allow him or her to interact with the bit Ten D through a remote control device called DRC.

 

Technical Specifications

Power Supply

  • Voltage: 11 ÷ 15 VDC
  • Idling Current: 0.4A
  • Switched off without DRC: 2.5mA
  • Switched off with DRC: 4mA
  • Remote IN Voltage: 7÷ 15 VDC (1.3mA)
  • Remote OUT Voltage: 12VDC (130mA)

Signal Stage

  • Distortion - THD @ 1 kHz, 1V RMS Output: 0.005%
  • Bandwith @ -3 dB: 10 ÷ 22kHz
  • S/N Ratio @ A weighted
    • Digital Input: 105dBA
    • Master Input: 95dBA
    • AUX Input:  96dBA
  • Channel Separation @ 1 kHz: 85dB
  • Input sensivity (Speaker In):  2 ÷ 15V RMS
  • Input sensivity (AUX In):  0.6 ÷ 5V RMS
  • Input sensivity (PHONE):  2 ÷ 15V RMS
  • Input impedance (Speaker In): 2.2 kΩ
  • Input impedance (AUX):  15 kΩ
  •  Input impedance (PHONE):  2.2 kΩ
  • Max Output Level (RMS) @ 0.1% THD: 4V RMS

Input Stage

  • High Level (Speaker):  FL - FR - RL - RR, Phone IN
  • Low Level (Pre):  AUX IN
  • Digital Optical IN (S/PDIF max 96kHz/24bit): Optical IN

Output Stage

  • Low Level Pre (default): FRONT L/R, REAR L/R, Sub
  • Digital AD Link: (CH1 ÷ CH8 S/PDIF)

Connection

  • From / To Personal Computer:  1 x USB / B (1.1/2.0)
  • To Audison Electronics: AC Link controls

Crossover N.5 (one each output channel)

  • Filter Type:  Full / High Pass / Low Pass / Band Pass
  • Filter mode and slope:  Linkwitz @ 12 / 24 dB Butterworth @ 6 / 12 / 18 / 24 dB
  • Crossover frequency:  68 steps @ 20 ÷ 20k Hz
  • Phase control:  0° ÷ 180°

Equalizer

  • On Hi-Levels input (Speaker In):  Automatic De-Equalization
  • On Outputs:  N.5 Graphic: ±12 dB @ 31 Band ISO 1/3 Oct. 20 ÷ 20k Hz

Time Alignment

  • Distance:  0 ÷ 510 cm / 0 ÷ 200.8 inch
  • Delay:  0 ÷ 15 ms
  • Step:  0.08 ms; 2.8 cm / 1.1 inch
  • Fine set: 0.02 ms; 0.7 cm / 0.27 inch

 

 

 

img

Added to cart successfully!