Audison Bit Ten Signal Interface Processor

Audison Bit Ten Signal Interface Processor
_____________________________________________________________________________
*Local Supplier Warranty*

The bit Ten is a digital signal processor essential to maximize the acoustic performance of your car audio system. It consists of a 32-bit DSP processor and 24-bit AD and DA converters. It can connect to any factory system, even in vehicles featuring an integrated audio processor, since, thanks to the de-equalization function, the bit Ten will send back a linear signal. It features 7 signal inputs: 4 Hi-Level, 1 Aux Stereo, 1 Phone and provides 5 PRE OUT analog outputs. Each output channel has a 31-band equalizer available. It also features a 66-frequency electronic crossover as well as BUTTERWORTH or LINKWITZ filters with 6-24 dB slopes and a digital time delay line. The user can select adjustments that allow him or her to interact with the bit Ten through a remote control device called DRC.

Power Supply
- Voltage: 11 ÷ 15 VDC
- Idling Current: 0.4A
- Switched off without DRC: 2.5mA
- Switched off with DRC: 4mA
- Remote IN Voltage: 7÷ 15 VDC (1.3mA)
- Remote OUT Voltage: 12VDC (130mA)

Signal Stage
- Distortion - THD @ 1 kHz, 1V RMS Output: 0.005%
- Band with @ -3 dB: 10 ÷ 22kHz
- S/N Ratio @ A weighted
- Master Input: 95dBA
- AUX Input: 96dBA
- Channel Separation @ 1 kHz: 85dB
- Input sensitive (Speaker In): 2 ÷ 15V RMS
- Input sensitive (AUX In): 0.6 ÷ 5V RMS
- Input sensitive (PHONE): 2 ÷ 15V RMS
- Input impedance (Speaker In): 2.2 kΩ
- Input impedance (AUX): 15 kΩ
- Input impedance (PHONE): 2.2 kΩ
- Max Output Level (RMS) @ 0.1% THD: 4V RMS

Input Stage
- High Level (Speaker): FL - FR - RL - RR, Phone IN
- Low Level (Pre): AUX IN

Output Stage
- Low Level Pre (default): FRONT L/R, REAR L/R, Sub

Connection
- From / To Personal Computer: 1 x USB / B (1.1/2.0)
- CROSSOVER N.5 (one each output channel)
- Filter Type: Full / High Pass / Low Pass / Band Pass
- Filter mode and slope: Link witz @ 12 / 24 dB Butterworth @ 6 / 12 / 18 / 24 dB
- Crossover frequency: 68 steps @ 20 ÷ 20k Hz
- Phase control: 0° ÷ 180°

Equalizer
- On Hi-Levels input (Speaker In): Automatic De-Equalization
- On Outputs: N.5 Graphic: ±12 dB @ 31 Band ISO 1/3 Oct. 20 ÷ 20k Hz

Time Alignment
- Distance: 0 ÷ 510 cm / 0 ÷ 200.8 inch
- Delay: 0 ÷ 15 ms
- Step: 0.08 ms; 2.8 cm / 1.1 inch
- Fine set: 0.02 ms; 0.7 cm / 0.27 inch