Audison Thesis Series TH uno Monoblock 1-CH Car Amplifier

Audison Thesis Series TH uno Monoblock 1-CH Car Amplifier 

The Thesis TH amplifiers are manufactured using state-of-the-art analog and digital technology. Class A amplification stage, multi-standard analog and digital inputs and the control of the amplifier through a microprocessor make this product the most evolved among the Audison range. TH uno is a single channel (mono) amplifier used to achieve maximum performance under any load; capable of delivering up to 2300 W into 1 Ohm and 200 W in the audiophile A Class mode. Specifically designed to drive systems and subwoofers with self-assured mastery.

Technical Specifications

Power supply

• Voltage:  11 ÷ 15 VDC
• Idling current:
• A-Class:  8.5A
• Hi-AB Class:  6.2A
• Hi-Current:  4.3A
• Energy Saving:  2.2A
• Switched off:  0.04mA
• Consumption @ 14.4 VDC, 1Ω, Max musical power: 132A
• Remote IN voltage:  7 ÷ 15 VDC (1mA)
• Remote OUT voltage:  12 VDC (50mA)
• Internal fuse (AFS):  150A

Amplifier Stage

• Distortion - THD @ 1 kHz, 4Ω, 90% Power:  0.01%
• Bandwidth @ -3 dB, 2V RMS, 4Ω:  5 ÷ 40kHz
• S/N ratio @ A weighted, 1V, Max Power:  106dBA
• Damping factor @ 1 kHz, 2V RMS, 4Ω: 500
• Input sensitivity (two ranges):  0.3 ÷ 1.2 / 1.2 ÷ 4.8V RMS
• Input impedance (PRE IN):  15kΩ
• Load impedance (Min @ Dual Power Mode - Hi-Current): 1 Ch 1Ω
• Nominal power (RMS) @ 12 VDC, 1% THD:
• Dual Power Mode - Hi-Current:
  • 1 Ch @ 4 Ω 590W x 1
• Dual Power Mode - A Class:
  • 1 Ch @ 4 Ω 165W x 1
• Output power (RMS) @ 14.4 VDC, 1% THD
• Dual Power Mode - Hi-Current:
  • 1 Ch @ 4 Ω 850W x 1
  • 1 Ch @ 2 Ω 1500W x 1
  • 1 Ch @ 1 Ω 2300W x 1
• Dual Power Mode - A Class:
  • 1 Ch @ 4 Ω 200 W x 1
• Amp Chain Mode (Two Linked Amplifiers)
• Output power (RMS) @ 14.4 VDC, 1% THD
  • 1 Ch @ 4 Ω 3000W
  • 1 Ch @ 2 Ω 4500W

CEA Specifications

• Output power @ 4 Ω, ≤ 1% THD+N, 14.4V:  700W x 1 Ch
• SN ratio (ref. 1 W output):  75dBA

Inputs / Outputs / Filters

• Inputs: PRE / SP-DIF (Max 192 kHz/24 bit) OPTICAL and AD Link
• Outputs:  PRE Bypass / AD link
• Filters:  Removable kit (Hi-pass / Lo-pass / Band-pass 12/24 dB/oct) 32 steps 18 ÷ 7.5k Hz with 8 standard & 2 customizable modules
• Special Function (Linked Amplifiers):  Master / Slave Bridge, Slave Chain

Content:

• 1 x Car Amplifier
• Manual
• Fitting as per Manufacturer