Alpine S2-A60M S-Series mono subwoofer amplifier — 600 watts RMS x 1 at 2 ohms

Big bass power

Alpine's Next Generation S-Series S2-A60M mono subwoofer amplifier makes it a lot easier to get great bass in your ride, delivering up to 600 watts RMS power to your sub. A variable bass boost allows you to dial in some extra kick and impact for more low-frequency enjoyment. You can even add an optional wired remote to control the level of bass from your front seat.

More convenient features

A low-pass filter puts you in command of the frequency spectrum that reaches your sub. The amp includes preamp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.

Description::

●mono subwoofer amplifier

●330 watts RMS x 1 at 4 ohms

●600 watts RMS x 1 at 2 ohms

●600 watts RMS x 1 at 1 ohm

●variable low-pass filter (50-400 Hz, 24 dB/octave)

●variable bass boost (0-12 dB at 50 Hz)

●optional wired remote available

More info:

●preamp and speaker-level inputs

●speaker-level inputs handle up to 10V

●RCA adapters required for speaker-level input

●signal-sensing turn-on with speaker-level inputs

●preamp outputs

●wiring and hardware not included with amplifier

●4-gauge power and ground leads recommended

●fuse rating: 30A x 2

Dimensions: 8.66"W x 2.21"H x 8.3"D

warranty: 1 year

What's in the box:

Alpine S2-A60M owner's manual

●Mono subwoofer amplifier (two 30A ATO fuses installed)

●2 End caps

●Four 3/4" screws

●Four 1/4" screws

●2mm Allen key

●Owner's manual (En/ Sp/ Fr/ Others)

●Alpine Verification Certificate

●Warranty information

●Power supply note