Audison APBMW S8-2 8" (200mm) 300Watts Peak 2-Ohms Plug & Play Sub Car Subwoofer
Audison APBMW S8-2 8" (200mm) 300Watts 2-Ohms Plug & Play Sub Car Subwoofer
Subwoofers have been designed with electro-acoustic parameters that maximize performance for the factory box available below the seats. The ABS plastic basket, reinforced with fiberglass, and the acoustic structure featuring a front magnet, provide for a minimal installation depth for a perfect compatibility with the whole range. Two 5 mm polyurethane gaskets, supplied, allow the subwoofer to fit perfectly to the box, decoupling it from vibration.
The 200 mm (8″) APBMW S subwoofers allow a “direct replacement” of the OEM speakers underneath the front seats, making the most of the factory acoustic load and generating deep and crisp low frequencies. You can choose between S8-2 with 2 ohm impedance and S8-4 with 4 ohm impedance for improved system composition versatility. In fact, in the mid-high passive filtered system configuration, with the crossover provided, 4 of the 8-channels of the AP 8.9 bit can be configured in bridge mode delivering 130W rms to each S8-4 installed under the seat. The S8-2 can be used in a fully active, multi-amplified front system, maximizing the power of the AP 8.9 bit at 2 ohms, and employing additional 2 channels for the rear system. The Neodymium magnet used on S8-4 and S8-2 allows for greater power and control than ferrite, while maintaining the depth of installation unaltered.
- Component: Subwoofer
- Size: 8” 200mm
- 300W Peak
- 150W Continuos
- Impedance: 2Ω
- Frequency Response: 40 ÷ 500Hz
- Magnet size D x d x h: 48x18x7mm / 1.89” x 0.71” x 0.28”
- Voice Coil Ø: 2” (50mm)
- 1 x Car Subwoofer
- Fitting as per Manufacturer